Trims & Accessories Quality processes Check List.

Trims & Accessories Quality Check List.

Objective:
·         To receive Incoming material
·         To check material for attribute & variables
·         To arrange an incoming material in an allocated racks
·         To  issue  trims  as  per  production  planning  &  other  material  as  per requirement
·         To mention a record of incoming & outgoing material
·         To do an audit to check physical inventory.
Trims inspection:
Lot size or quantity being audited
Inspect
Accept
less than 151
8
0
151-280
20
0
281-500
32
1
501-1200
32
1
1201-3200
50
2
3201-10000
80
3
10001-35000
125
5
35001-150000
200
7
150001-5000000
315
10
500000-above
500
14

Check Point

1.     Sewing Thread
·         Construction- Yarn strength, elongation, and number of plies.
·         Sew-ability- Check the running performance.
·         Free from slob, knots and shade variation.
·         Check winding and Finish.
·         Thread must be incorrect quality to keep its strength, also after heavy garment wash.
2.     Zippers
·         Width of tape.
·         Color uniformity
·         Slider should lock properly
·         Should not pucker when attached to the fabric.
·         Waviness
·         Contamination
§  Metal Accessories to be tested for the banned chemicals as per the buyer’s Chemical Restriction Manual.
§  Metal accessories for Babies and Children’s wear must be tested individually for ferrous and also be  passed through the  needle  detector  as a  finished product before bulk production starts.      
3.     Buttons
·         Check for hole centers
·         Clean sew holes.
·         Button thickness and diameter as per specification
·         Color and shade as per standard
·         Withstand laundering, dry cleaning, and pressing
·         Crack, scratch marks, and sharp edges.
·         Sharp edges are being checked in the sample picked
4.     Elastics
·         Must have suitable elasticity.
·         Acceptable expiry date.
·         Be relaxed and pre-shrunk e.g. tumble dried or steamed before sewn into the garments.
·         Checked for width, thickness, elasticity, construction, and waviness against the approved one
5.       Labels
·         Dimension as per standard
·         Print
·         Instructions
·         Care label, Country of origin label, and other regulatory labels as per the clients’ requirement must be wash-proof and readable during the useful life of the product. The same needs to be checked and ensured.
·         Must  be  also  checked  as  per  the  approved  sample  of  the  same  on merchant approved trim card.
6.     Poly Bags

·         Dimension as per standard.
·         Quality.
·         Print on polybag.
·         Seal if required.
      7.     Carton Box
·         Dimension as per standard.
·         Cardboard quality.

·         Print on cardboard.

1 comment:

Please Do Not Enter Any Spam Link In The Comment Box.

Powered by Blogger.